Peak Hill Industries IMMOBILIZER SHEEP WORKER, Руководство по эксплуатации

Страница: 10 / 24

10
4. REAR ACCESS MODULE
(a)
With the IMMOBILIZER set to your preferred working height, adjust the
wheels in the same way on the REAR ACCESS MODULE so it is the same
height as the machine
(b)
The module can go on either end, depending on the location you
selected for the machine. Generally the REAR ACCESS MODULE attaches on
the end with handles
(c)
To connect the REAR ACCESS MODULE, lift the two “anti-luce” fasteners
( FIG.5 ) on the IMMOBILIZER up and out to unlock. Wheel the REAR ACCESS
MODULE towards the machine lining up the “anti-luce” with the two holes
under the base sliding through until the REAR ACCESS MODULE sits fully
onto the machine. Lock the “anti-luce” into position by flipping up until
they sit vertically
3. WORKING HEIGHT
Probably the most important step is for the operator. Each leg can be
adjusted to achieve the most comfortable vertical working height for you
keeping your back straight as possible at all times
To adjust operational height; lift the machine, remove the locking pin from
leg and adjust to desired position aligning hole to reinsert pin. The factory
setting is generally suited for person of average height
FIG.4
LOCKED
UNLOCKED
FIG.5