Peachtree Audio deepblueSKY, Руководство пользователя

Страница: 7 / 12

REMOTE
B
On/Standby Button: With the AC power
cord connected, this button toggles the unit
between On mode (which selects the last
input used) and Standby mode which lights the
LED red. Note: the input LEDs will flash white
in a sequence when the unit goes into on or
standby mode.
C
BASS +/-: Increases or decreases the BASS
(low frequencies). The front panel input LEDs
will display the bass level with FLAT indicated
by the middle LED being lit Blue.
D
VOL

/

: Increases and decreases the output
level. Note: the volume level will be indicated
for ~2 seconds using the 5 blue input LEDS on
the front panel. Each LED represents ~20% of
the entire volume range.
E
Wireless: Push and release to select the
Wireless network input. The LED will light
blue for 10 seconds indicating the input is
selected. For more information on the wireless
network input, please refer to that section.
F
Transport Control Buttons: Controls playback
of compatible sources connected.  selects
the previous track or the beginning of the
current track if playback is in progress. 
toggles between play mode and pause mode.
 selects the next track in the current queue
or list. Please note that some USB capable
devices and wireless streaming applications may not support these controls. This
is not a malfunction of the remote control. If the source does not respond to these
commands, it does not support them.
G
1 2 3 4 5 6: Selects the wireless network input presets 1-6 after they are setup in the
mobile app. For more information on setting up wireless network input presets, please
refer to the wireless network input section.
H
OPT Button: This button selects the OPT input and lights the LED blue.
Note: The inputs buttons will also toggle the unit into On mode when in Standby
mode for faster access.
I
AUX Button: This button selects the AUX input and lights the LED blue.
J
MUTE Button: Mutes and un-mutes the RIGHT & LEFT Speaker and headphone
outputs. Note: the currently selected input LED will flash white while the output is muted.
K
TREB /-: Increases or decreases the TREBle (high frequencies).
L
FLAT Button: Sets the bass and treble control to “FLAT” (no increase or decrease applied).
OPT
PRESETS
AUX
FLAT
2 1
4 6 3 5
B
C
D
E
F
G
H
I
J
K
L