Peach PB200-70, Руководство по эксплуатации

Страница: 6 / 18

6
Safety notices
The following safety notices must be
followed when using electric devices :
AVOID THE DANGER OF DEATH
FROM ELECTRIC SHOCK!
Immediately have a malfunctioning or
damaged device inspected and repaired
by an authorised professional or cus-
tomer service.
Avoid the risk
of injuries!
Never touch the heating surface, as it
becomes very hot.
Description
1
Document holder
2
Start button
3
On / Off switch
4
OK light
5
Power indicator
6
Binding shaft
7
Cooling rack
Operation
Switching on the thermal binding machine
Connect the device to the power supply
and press the On / Off switch
3
(Position “I“). The red power indicator
5
will light up: The device will heat up to
the operating temperature. The device
will reach the optimal operating temper-
ature after approx. 3 minutes. The green
OK light
4
will light up and an acoustic
signal wil sound.
Binding
Select the correct Peach thermal portfo-
lio and place the pages to be bound in it
(see chart).
Number
of sheets
(80 g / m
2
)
15 20 30 40 60 80 100 120 150
Portfolio
thickness
in mm
1.5 2 3 4 6 8 10 12 15
Take the portfolio and hit it on the spine
once or twice.
Lift the document holder
1
all the way
up.
Place the prepared thermal portfolio into
the binding shaft
6
, until the portfolio
spine touches the heating surface
(see Fig. C).
Now press the Start button
2
; the OK
light
4
will start flashing. After approx.
1 minute the OK light
4
will briefly ex -
tinguish and then light steady, acoustic
signal will sound. The binding process is
now complete.
Pull the cooling rack
7
all the way out.
Now place the bound portfolio into the
cooling rack
7
to allow the binding to
cool. After 60 seconds you have a
perfect binding.
Switching off the thermal binding machine
After finishing the respective bindings,
switch off the device by pressing the
On / Off switch
3
(Position „ 0“).
Cleaning and care
Always remove the power plug before
cleaning. Allow the device to cool down
before cleaning.
Clean the heating surface and plastic
parts with a slightly dampened cloth
and, if necessary, a mild detergent.
English