Cyclone for ARM devices User Manual
45
Cyclone for ARM
®
devices
Since the LCD can display up to 16 characters, it is recommended to keep the
description concise.
This field will not affect the Cyclone for ARM devices’s operations with the
target.
5.1.8
Store Image To Cyclone
“Store Image to Cyclone” allows the current configuration to be programmed
into the Cyclone for ARM devices. The Cyclone for ARM devices will then be
ready for operations.
Figure 5-8: Image Management And Transfer Dialog
The Interface drop-down list allows the user to select one of three Serial,
USB, or Ethernet interfaces. The Port drop-down list allows the user to select
from one of the Cyclones available on that interface. In the case of a Cyclone
present on a different network (i.e., not displayed automatically in the Port
drop-down list), the user may specify its IP address by using the Specify IP
button.
“Store Image to Cyclone” will then store the image on the selected Cyclone.
5.1.9
Store Image To Disk
“Store Image To Disk” allows the current configuration to be saved onto the
hard drive. The image can then be transferred to the Cyclone for ARM
devices internal flash or external CompactFlash (with activation) via the
Manage Images Utility.
5.1.10
Save Cyclone Configuration
“Save Cyclone Configuration,” in the file menu, allows the user to save the
Содержание Cyclone MAX
Страница 1: ......
Страница 6: ...iv Cyclone for ARM devices User Manual Cyclone for ARM devices ...