1. FASTEN THE PROJECTOR MOUNT TO 1 ½”NPT PIPE
1: The bracket must be secured to a ceiling structure capable of at least
2: Screw the bayonet sub assembly onto the 1 ½” NPT pipe (not supplied).
3: Secure with the locking set screw making sure the sub assembly
safety lever is facing the front
of the projector.
4: Fine adjustment can be made for rotation by loosening the two screws on the 1 ½’collar and rotating to the desired
position and tighten the two screws.
SEE FIG 2
(4) times the weight of the pro mount.
Fig 2
Fig 3
2. FLUSH MOUNTING THE PROJECTOR MOUNT
safety lever
Rotation screws
locking set screw
Pipe Not Supplied
Bayonet Sub Assembly
Projector Front
1: The bracket must be secured to a ceiling structure capable of at least (4) times the weight of the pro mount.
2: For flush mounting of the pmu50 remove the 1 ½” collar and the side screws.
3: Position the pmu50 mounting plate against the ceiling structure with the chamfer facing the rear of the viewing screen (a solid wood
construction is required behind any ceiling structure).
SEE FIG 3
4: Using the two lag bolts and washer supplied fasten to the ceiling.
5: Re-attach the bottom part of the mount using the side screws removed earlier.
SEE FIG 3
Chamfer facing away
from the viewing screen
Wood beam
Front of mount
Side screws
5
O
P
