1 FASTENING THE MOUNTING PLATE TO THE WALL
Avoid installing in locations where the temperature and humidity are excessively high, and where contact with any
.
.
Do not install in locations where there is excessive vibration or impact. Injury and damage could result from the monitor mount
.
Use the specified screws in the specified places and tighten firmly. Failure to do this could cause injury if the monitor.
could result with injury due to the monitor mount falling. .
.
NOTE: Do not over tighten the bracket mounting screws as damage to the monitors internal mounting threads could occur.
C A U T I O N : I N S T A L L A T I O N O F U N I T I S T O B E C A R R I E D O U T B Y Q U A L I F I E D T E C H N I C I A N S O N L Y. I N S T A L L I N
A N A P P R O P R I A T E L O C A T I O N B Y C H E C K I N G T H E S T R U C T U R E A N D D U R A B I L I T Y F O R S A F E T Y A N D
A C C I D E N T P R E V E N T I O N .
INSTALLATION LOCATION
water is possible. These can result in fire or electric shock.
.
.
falling.
.
mount falls.
.
Do not alter any of the parts. Do not use broken parts. This
.
Note:
.
3
2
CAUTION
WARNING
WARNING
Locate the best viewing angle for the monitor, and using the 4 wall anchors supplied, attach the mounting plate
to the wall. Place the narrow end of the plate facing downward. Alternate hardware may be required if attaching
to a solid surface.. See
fig 3
and
fig 4
The wall where the mount is to be installed must be capable of long-term support of the
total load of the monitor and mount. Measures should be taken to ensure sufficient
strength to withstand the force of earthquakes , vibrations and other external forces.
Incorrect installation can cause the monitor mount to fall and cause injury.
Total load of the mount ( m Mount)
Maximum weight - 20 Lbs ( 10Kg.)
2 ATTACH THE MOUNT TO THE MONITOR
Fig 5
Fig 4
Lay the monitor on a soft surface ,face down, and attach the mount using 75mm or 100mm VESA hole
pattern and the 4 screws supplied. See
fig 5 ( note top of monitor)
Mounting surface
½”wall board
Mounting plate
Wall anchors
M o u n t i n g s c r e w s
Top of Monitor
75mm & 100mm
Vesa hole pattern
Mounting plate
