3. MOUNT THE DISPLAY TO THE WALL MOUNT BRACKET
Fig 4
Fig 5
4. ADJUST LATERAL MOVEMENT AND TILT
Lateral Movement:
Fig 6
Fig 7
Locking bar (C)
Lift the display, with the brackets attached, onto the wall plate.
See Fig 4
Position the top and bottom into the slots.
See Fig 5 and 6
Make sure the display brackets engage the rails on the wall mount bracket (B) See Fig 5
Insert the locking bar (C) as shown in
Fig 5
with the locking holes facing up to match the holes in the wall mount bracket (B) .
Secure with a padlock (not supplied) thru holes in the locking bar (C) and wall mount bracket (B)
Fig 5
13°
6
Once the display on the wall is complete, you can still move the display left to right to optimize the final viewing position
by gently sliding the unit on the wall bracket. The adjustment distance will vary depending on the display size being
used.
See Fig 7
Tilt adjustment:
Tilt adjustment can be made by holding the top of the display and loosening both tri knobs.
After tilt adjustment is complete, tighten both tri knobs.
See Fig 6
Tri knob