4
6300/6400V/VF EXIT INSTALLATION INSTRUCTION
SVR DEVICE
Phone: 833-2-PDQTEC | www.pdqlocks.com
639401 Rev1 – 5/5/21
10. ADJUST BOTTOM ROD
*Omit this step for LBR devices.
Ensure top latch is in the unlatched
position.
While the top latch is in the unlatched
position adjust the bottom rod until it
clears the strike by approximately 1/8".
Install #8-32 flat head screw.
11. INSTALL HEAD COVER
AND LATCH COVERS
Install the headcover. Secure with four #8-
32 x 1/4" flathead screws.
Install latch covers, secure with two #8-
32 x 1/4" flathead screws each.
12. INSTALL ROD GUIDES
Measure distance between latches and
chassis head cover. Mark the centers.
Using the rod guide as a template, mark
the hole locations making sure the rod is
centered in the guide and the guide is
level.
Predrill hole locations with a 1/8" drill bit.
Install rod guides using the #8 flat head
screws from screw pack 639045.
Snap the rod guide cover over the rod
guide.
