PDQ Yachts 36 Capella Скачать руководство пользователя

Страница: 13 / 66

PDQ 36 Capella - Owner’s Manual

Auxiliary Engines 3-1

(Continued)

Ensure that the Yamaha outboards’ green oil pressure lights are

when they are

running. If the oil pressure light goes out, stop the motor as quickly as possible. A

small jet of water at the back of the engine shows correct operation of the cooling

system.

Disconnect the batteries before removing the motors or performing any major

maintenance.

“LRC” Inboard Diesels

Auxiliary power is provided by two Yanmar 18 HP Diesel Sail drives, located in the

stern of each hull, and operated from the helm. Seacocks for cooling water, fuel filters

and shut-off valves are located within the engine compartments.

The Diesel’s manual contains an excellent and concise summary entitled,

Basic

Rules…

Please read the two-page section as a guide to other information you may need

from the manual. The motors will work better and last longer if you understand their

needs.

If the engine has been idle for more than a month, follow the manual’s pre-start

procedure for spreading lubricant through it.

When inserting the starter keys, make sure that each key goes into the correct ignition

lock. (You may simplify this by colour-coding the port and starboard keys with red and

green tape or a key tag) Do not try to force the key, as this may damage the ignition

lock.

Caution:

Incorrect operation or failure to perform required

maintenance might jeopardize the manufacturer’s

warranty.

Starting Batteries

These are described in section 4-2.

Содержание 36 Capella



































































Результаты поиска

Содержание 36 Capella

Отзывы:

Похожие инструкции для 36 Capella

Бренды по названию

Популярные бренды

PDQ Yachts 36 Capella, Руководство пользователя

Результаты поиска

Содержание 36 Capella

Отзывы:

Похожие инструкции для 36 Capella

Бренды по названию

Популярные бренды