background image

AFTERGLOW® AP.2 

For PlayStation®3

For:

PL-6422A

   

 

Thank you for purchasing the AFTERGLOW® AP.2 Wireless for  

   

 

PlayStation®3!

 

 

Contents: 

1 AFTERGLOW® AP.2 for PlayStation®3. 

1 AFTERGLOW®  Wireless Link USB Adapter 

1 USB Charge Cable 

1 Manual

Using the AFTERGLOW®  AP.2: 

1) The AFTERGLOW® AP.2 is designed to work with the Sony PlayStation®3 videogame system.  

2) Your new AP.2 Wireless controller features an integrated rechargeable battery pack that should be fully  

 

    PlayStation®3 when it is powered on. Connect the mini-USB plug to your AP.2 controller. The indicator  

 

 

 

 

 

 

 

    Wireless Link USB Adapter into one of your PlayStation®3’s USB ports while the system is powered on.  

    Press any button on your AP.2 controller and an automatic pairing will take place. 

 

 

 

 

 

 

4) After pairing is complete your AP.2 controller will show it’s controller number designation via one of 4  

     indicator LEDs. It is now ready to use. Time for some gaming!

 

 

 

 

 

 

 

 

     soon to avoid interruption of play. 

Changing AFTERGLOW®  Modes: 

 

     AP.2 must be connected to a PlayStation®3 console to function.  

2) The AFTERGLOW® button on the AP.2 is located near the controller indicator lights on the controller. 

3) The AFTERGLOW® AP.2’s default setting is “ON.”

 

 

 

 

 

 

 

4) Press the AFTERGLOW® button once to change to “VIBRATION” mode. Lighting occurs in this mode when  

     the AP.2 rumble motors activate.

 

 

 

 

 

 

 

5) Press the AFTERGLOW® button once more to change to “OFF” mode. No lighting occurs in this mode.

 

 

 

 

 

 

 

6) Press the AFTERGLOW® button once more to return to “ON” mode. 

7) Cycle through the three settings as often as you like and enjoy the AFTERGLOW®  in your favorite mode!

Frequently Asked Questions 

Can I charge my AP.2 controller before the battery is completely drained?

 -Yes, you can charge the AP.2 any 

time you like. You will not damage the battery by charging when the battery still carries a charge.  

Can I use my AP.2 controller while it is charging via USB? 

-Yes, you can play with the AP.2 and charge it at the 

same time.  

Can I use multiple AP.2 controllers with my PlayStation®3? 

-Yes, you can use up to 4 AP.2 controllers with your 

PlayStation®3 provided your system has 4 USB ports available.  

My AP.2 controller will not sync with the PlayStation®3. What can I do? 

 

controller and a wireless link should be established. Make sure your PlayStation 3 is powered on and that 

your AP.2 controller’s battery has a charge. 

 

CAUTION

 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined 

 

—Reorient or relocate the receiving antenna. 

—Increase the separation between the equipment and receiver. 

 

—Consult the dealer or an experienced radio/TV technician for help. 

FCC ID for Controller: X5B-PL6422A1 FCC ID for Dongle: X5B-PL6422A2

This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) 

this device must accept any interference received, including interference that may cause undesired operation.

IC for Controller: 8814A-PL6422A1      IC for Dongle: 8814A-PL6422A2
This device complies with Industry Canada 

licence-exempt 

RSS

 standard(s)

. Operation is subject to the following two conditions: (1) this device may not cause interference,  

and (2) this 

device must accept any interference, including interference that may cause undesired operation of the device.

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian 

information on RF exposure and compliance.

© 2014 Performance Designed Products LLC. All rights reserved. PDP is a trademark, and AFTERGLOW is a registered trademark, of Performance Designed Products 

LLC. PlayStation®3 is a registered trademark of Sony Computer Entertainment, Inc. This product is not designed, manufactured, sponsored or endorsed by Sony 

Computer Entertainment.

For technical questions please visit

www.pdp.com or call: 1-800-331-3844 (USA & Canada only)

*please keep this information for future reference

1840 East 27th Street 

Vernon, CA 90058 USA

Siena Court, Broadway,

Maidenhead SL6 1NJ

“For ages 12+”

2 year limited warranty. See www.pdp.com for details.

®

The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction 

with any other antenna or transmitter.

Отзывы: