Communication
Systems Inc.
PDI-P23LCDC Quick Programming
Instructions
Page 2 of 3
Better Solutions Are Within Reach™
Document Number PD196-121 Rev 1
6. Press the CH
▲
/ CH
▼
button to select the Channel Sequence menu item.
7. Press VOL
◄
/ VOL
►
to set the Channel Sequence in which the channels are displayed after
searching.
Interleave A+D: In the order of channel number regardless of the system.
All A then D: Digital channels are displayed after all analog channels.
8. Press the CH
▲
/ CH
▼
button to select the Service Level you wish to program. The menu
displays the current programming status of each level as either Programmed or Blank. NOTE:
A Programmed service level can also be re-programmed if desired.
9. Press the VOL
►
button to start auto programming.
10. A confirmation menu will appear before proceeding. Press either the CH
▲
to start auto
programming. Press CH
▼
button to cancel the operation. The TV will now search all
available channels. Auto programming may require several minutes to complete.
11. Press the SETUP button to return to normal TV viewing.
SOUND SETUP FOR PILLOW SPEAKER OPERATION
Internal Speaker Enable
The speaker’s inside the TV’s cabinet can be turned on or off for either different TV Service Level
or Source modes. Note: Turn Off the TV’s internal speaker to guarantee sound to an attached
pillow speaker.
1. In the Sound menu, press CH
▲
/ CH
▼
button to select the Internal Speaker Enable menu
item.
2. Press the CH
▲
/ CH
▼
button to select the desired Service Level(s) or Sources.
3. Press VOL
◄
/ VOL
►
to Disable.
4. Press the SETUP button to return to the preceding menu.
