Document Number PD196-256R1
PDI-P15Q Quick Start Guide
Page 5 of 7
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 800-628-9870 FX 937-743-5664
Programming the TV
The PD108-420 programming remote control is required to perform all setup operations for the television. One
remote is sent with each order and additional remotes must be purchased separately.
Note
: The following instructions assume you have a programming remote, have correctly mounted the TV and
connected an RF coax cable signal.
Channel Setup
Service Levels Setup
The TV offers three different programmable channel banks or Service Levels: Free, Basic, and Premium. Only one
service level is usable at a time.
Disabled
– This is like a mechanical key lock – when in
Disabled
Service Level, the TV can be turned off and on, but
it cannot be used for viewing. A standard message appears on a black screen
Free
– This lets patients watch hospital education and information channels without renting the TV. The channels
containing programming for no charge are typically programmed into this level of service. This is the factory default
setting for Service Level.
Basic
– This service level typically allows additional channels beyond those offered in the FREE level.
Premium
– This is the highest service level with typically the most channels available for viewing.
1. In “Channel” screen, highlight “Service Level” with
▲ or ▼ arrows on remote.
2.
Press ► to enter next screen and select desired service level. Once desired service level is shown it
automatically saves and you may exit the screen.
3. Press “Setup” or “Exit” to exit the screen.
