PDi PDI-P10LCD, Инструкция по установке и эксплуатации

Страница: 12 / 21

PDI-P10LCD USER MANUAL
Document Number PD196-058R3
PDI Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066
Phone 937-743-6010 Fax 937-743-5664 email: pdi@pdiarm.com
12
Channel Setup
1. AUTOPROGRAMMING
Press the “SETUP” button on the remote control. A “SETUP
MODE” screen will appear.
2. Using the “CH ▲ ” or “CH ▼ ” buttons on the remote and select
“Channel Setup”. Press “VOL ▼ ” or “VOL ▲ ” to enter the
“Channel Setup” sub-menu.
3. Select the correct “Signal” type.
4. Select “Autoprogram”. In the Autoprogram menu select the
Service Level you wish to auto program.
5. Press “Vol ▼ ” or “Vol ▲ ” to begin the autoprogram sequence. A
“Confirm Autoprogram Start” menu will now appear. To continue
press “Chl
▲ ” to begin autoprogramming. Press “Chl ▼ ” to exit.
Add / Delete Channels
1. Press the “SETUP” button on the remote control. A “SETUP
MODE” screen will appear.
2. Using the “CH ▲ ” or “CH ▼ ” buttons on the remote and select
“Channel Setup”. Press “VOL ▼ ” or “VOL ▲ ” to enter the
“Channel Setup” sub-menu.
3. Select “Add/Delete Channels”. A Menu showing the three
programmable service levels will appear with its current status.
Select the service level to add or delete channels in.
4. The TV will now display a channel in the service level selected.
An on screen menu will show the channel number at the top right
and the current service level. A green channel number indicates
an active channel that is viewable in that service level. A red
channel number indicates that channel is not programmed into
the current service level. Use the Volume
▲ / ▼ to Add or Delete
a channel. Once the service level is programmed, press
“SETUP” to exit the menu.
You may also tune
directly to a channel
during editing by
entering its number
on the remote’s
keypad.
SETUP MODE
Service Level : Free
Paid :
No
Self Rent : Unlocked
Picture
Channel Setup
Features
Language: English
Channel
▲ / ▼ to select
Volume ▲ / ▼ to change
Channel Setup
Signal : CATV
Autoprogram
Clear Service Level
Add/Delete Channels
Copy Service Level
Channel
▲ / ▼ to select
Volume ▲ / ▼ to change
Add/Delete Channels
Free: Programmed
Basic: Programmed
Premium: Blank
Channel
▲ / ▼ to select
Volume ▲ / ▼ to change