MODEL NUMBER:
PDI-MCA24-AC
Document Number:
PD196-412R2
Assembly Instructions
Page 2 of 8
PDi Communication Systems, Inc.
▪
40 Greenwood Ln
▪
Springboro, Ohio 45066 USA
▪
Phone 800.628.9870
SAFETY INFORMATION
Overhead Falling Hazard
TV can pose a striking hazard when mounted at an
elevated position. Use only PDi mounting brackets,
support arms, and appropriate hardware to assure
TV will not fall from the mounted position. Failure
to do so may cause injury or death.
Rain and Moisture
WARNING: To avoid the hazards of fire or electrical
shock, DO NOT expose this apparatus to rain or
moisture.
Note to Cable TV Installer
This reminder is provided to call the cable TV systems
installer’s attention to Article 820
-40 of the National Electrical
Code. The code provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be connected
to the grounding system of the building, as close to the point of
the cable entry as practical. Canadian installations shall be
properly grounded in accordance with the Canadian Electrical
Code, Part 1.
Cleaning and Disinfection
For the associated A-
Series 24” PDi TV:
Clean the exterior of this
television by removing dust with a lint-free cloth. Spot test a new
disinfectant by test cleaning a non-
obvious small spot on the TV’s
back cabinet, keypad, and LCD panel. PDi recommends using a
premoistened disinfectant cloth, like PD600-001 Super Sani-Cloth
or similar, or spraying cleaner onto a dry cloth and then wiping
the unit. Specific recommendations can be found at
. CAUTION: To avoid damage to the surface of
the television, do not use abrasive or chemical cleaning agents.
Oxygen Environment
WARNING: Do not use in any oxygen tent or
oxygen chamber. Such use may cause a fire
hazard.
Wet Location
Do not use this apparatus near water. Apparatus
shall not be exposed to dripping or splashing and
no objects filled with liquids, such as vases, shall
be placed on the apparatus.
Trademarks
© 2020 PDi Communication Systems, Inc. All rights reserved.
PDi
®
, medTV
®
and medTAB
®
are registered trademarks of PDi
Communication Systems, Inc. Manufactured under license from
Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol
are trademarks of Dolby Laboratories. The terms HDMI, HDMI
High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing
Administrator, Inc. Product logos, brands and other trademarks
displayed within PDi’s products are the property of their
respective trademark holders, who are not affiliated with,
endorsing, or sponsoring PDi Communication Systems, Inc. or our
products.
Disclaimer
The author and publisher have used their best efforts in
preparing this manual. PDi Communication Systems, Inc.
makes no representation or warranties with respect to the
accuracy or completeness of the contents of this manual and
specifically
disclaims
any
implied
warranties
or
merchantability or fitness for any particular purpose and shall
in no event be liable for any loss of profit or any other damages.
The information contained herein is believed accurate, but is
not warranted, and is subject to change without notice or
obligation.
