MODEL NUMBER:
PD168-084 Table Stand
Document Number:
PD196-435R1
Installation Instructions
Page 2 of 3
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪
▪ Phone 800.628.9870
3. Attach the Uprights to the base sub-assemblies as shown in Figures 3a or 3b by selecting the desired
mounting holes in the uprights, depending on the size of the TV. For the A55B and A43A, use Figure 3a,
and for the A24A and A32A, use Figure 3b. Attach with two (2) of Screw
I
, using Wrench
K
.
Note: Be sure to connect the right upright to the right base and left upright to the left base.
4. Attach the assembled brackets to the TV using the appropriate screws included with the base. Refer to
the instructions include with the TV for the appropriate screw diameter. Depending on the TV and the
location of the mounting screw(s), select the backer plate and/or spacers as needed. See Figures 4 & 5.
