MODEL NUMBER:
PD168-084 Table Stand
Document Number:
PD196-435R1
Installation Instructions
Page 1 of 3
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪
▪ Phone 800.628.9870
INTRODUCTION
This document provides the information to assemble and install the PD168-084 Table Mount kit for the A
Series TV’s (A24A, A32A, A43A, & A55B).
SAFETY
1. Always wear safety glasses/goggles to prevent injury from debris.
2. Follow the installation/removal instructions for your existing products.
TOOLS REQUIRED
1. Phillips screwdriver
2. 7
/16” and 1/2” wrench
3. Safety glasses/goggles
INSTALLATION
Included Hardware:
Assemble Supports:
1. This step is not required for the A24A and A32. Assemble the right (
A
and
C)
and left Uprights (
B
and
D
)
together using the nylon locking nuts
J
. Tighten the nuts with wrench
L
. See Figure 1.
2. Assemble the left and right base subassemblies (Left and Right are defined when viewing the TV when
watching the TV.). See Figure 2.
a. Right: Assemble bracket
E
to Bracket
G
with two (2) of Screw
I
, using Wrench
K
.
b. Left: Assemble bracket
F
to Bracket
H
with two (2) of Screw
I
, using Wrench
K
.
