Better Solutions Are Within Reach
®
MODEL NUMBER:
PDI-AA1013 Series Arm
Document Number:
PD196-330R1
Installation Instruction for 1013 Series Arm
Page 2 of 10
PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Scope:
How to install a 1000 series PDI arm into a PDI-180C wall bracket
.
Tool List:
1) Safety glasses/goggles
2) P1 OR P2 Phillips screw driver
3) Medium size pair of needle nose pliers
4) 5/32 Hex key or hex bit and driver
5) pliers
Safety Steps:
1) Always wear safety glasses/goggles to prevent injury from debris.
2) Follow the installation/removal instructions for your existing products.
Procedure:
Step 1:
Remove the PDIPFHMS103238 screw from the PD216-006 base pin cover and set aside for re-installing later.
Remove the PD216-006 basepin cover from the top of the wall bracket.
Remove the PDI-609 basepin from the wall bracket.
