PCW Microsystems SBC2516, Руководство пользователя

Страница: 6 / 32

6
Chipsets
- Intel
®
865G (GMCH) chipsets
- Intel ICH5 for south bridge (I/O controller hub)
- Firmware hub (FWH) 4Mbits flash ROM x 1
- PCI V2.3 compliant
On Board LAN
- Intel 82547EI gigabit Ethernet controller (dedicated by CSA port directly from the Intel
865G GMCH) and Intel 82551QM 10/100 Ethernet controller x 1 for SBC2516
- Compliant with PCI V2.1/V2.2, IEEE802.3, IEEE 802.3u, IEEE802.3x, IEEE802.3y,
IEEE8023ab – WfM 2.0, PC2001 compliant
- RJ45 with LED connector x 2
On Board VGA
- Intel 865G (GMCH) chipset integrated with graphics controller
- Hardware motion compensation assist for software MPEG/DVD decode
- Access system memory
- Fully PC 98 and PC 99 compliant
- 15 pin CRT connector x 1
On Chip I/O (ICH5)
- On board USB port x 2, USB 2.0 compliant
- Ultra ATA100/66/33 support, 40 pin connector x 2. 2-pin power connector for DOM (Disk
On Module)
- Serial ATA support, SATA connector x 2 ; data transfer bandwidth up to 150MB
On Board I/O
- ITE 8712F-A Super I/O
- SIO x 2, with 2x16C550 UARTs, 10 pin header x 2
- PIO x 1, bi-directional, EPP/ECP support, 26 pin connector x 1
- Floppy disk controller: 34 pin connector x 1
- 6-pin mini DIN connector x 1 for PS/2 keyboard/mouse, and 5-pin connector x 1 for external
keyboard
- On board buzzer x 1
- GPIO (4 in 4 out )
- On board 2 –pin header for I
2
C
- On board 5-pin header for IrDA
- On board 2-pin header for reset SW, 4-pin for speaker, 5-pin for keylock, 2-pin for IDE active
LED, and 2-pin ATX power SW
- One 3-pin power header for 3-pin power cable connected to backplane board
to support ATX Power On function.
- On board 4-pin additional power source input
. - AC’97 output, 10 pin header x 1