8
OPERATION GUIDE
To quickly reach the AP-WiFi-1200 information, access the Web UI portal
by connecting a computer to the Access Point ethernet port and browse to
192.168.1.1. There you will find everything you need to review the status and
modify factory settings.
The default Username is
root
. There is no Password set. Be sure to follow the
link to set the Username and Password.
Note:
Consider changing the default
192.168.1.1
address so there will not be a
conflict once the Access Point is connected to the network.
The Configuration section will explain how to change the Access Point settings.
3.3. Web User Interface
3.2. Setup
Only a few steps need to be taken to setup the AP-WiFi-1200. For convenience,
all the external ports and pushbutton switch are identified on the enclosure. See
Section 4
for installation details.
1.
Connect (2) Identified 2.4 GHz WiFi Antennas
2.
Connect (2) Identified 5 GHz WiFi Antennas
3.
Connect the 2.4 GHz Bluetooth antenna
4.
Attach the AP to the Power Injector and connect the Power Injector to the
Ethernet network with the supplied Ethernet cables.
5.
Apply power to the Power Injector.
6.
The LED Status Indicator will turn on green once the access point is operational.
It may take a minute or more to fully boot the Access Point.
