Brought to you by PCS Electronics, www.pcs-electronics.com
Appendix B – Setting up remote control via Ethernet
Software installation
Download the latest EthernetVirtualPort.exe from our website. You can find it here:
http://www.pcs-electronics.com/phpBB2/viewtopic.php?t=2268
Once you have the driver run the setup file and install the program on your computer. This process is very straight-forward
and should only take a few minutes. Wait for the installation to complete and then start the program.
Connect the MAXPRO5000 series exciter or CYB FM transmitter (which contains this exciter board) to your
network via Ethernet cable (cable not included). The Ethernet adapter is setup to accept IP from your router’s DHCP
server. It is possible to setup Ethernet adapter with fixed IP or to login directly to ADSL modem. If you need MAC address
of the Ethernet adapter open the cover of the unit and look at the Ethernet adapter, the MAC address is shown on the
adapter. Now create and configure a connection between the PC and CYB as shown below. Note the IP will
differ, but make sure the port is set to 5005!
Fig. 46: Setting up Ethernet connection for CYB, screen 1
Appendix
B