Elvira building instruction October 2011
Fix the
covers of the servos
with a double-sided adhesive.
In order to
move the triangular ends
of the ailerons, you
can bend a piece of steel wire (0,8mm or thinner) and glue
it into the end of the aileron as shown. Let the wire jut out
about 6mm.
You can also fix a piece of steel wire to the trailing end of
both control surfaces with adhesive tape. Let the wire be
movable inside the tape on one control surface.
If you want an easier solution, connect the two control
surfaces with an adhesive tape.
www.pcm.at
12
