Mode d’emploi
Operating instructions
Betriebsanleitung
Istruzioni per l'uso
Garant:
RBT
Document :
DE20-0015 Mode
d'emploi.docx
Validation : 19.03.13
Page : 2 de 4
DE20-0015
Zone industrielle C
Rte du Grammont 101
CH-1844 Villeneuve
PCM WILLEN SA
SWISS MADE
Copyright © PCM Willen SA.
Tél ++41 21 967 33 66
Fax ++41 21 960 38 95
http://www.pcm.ch
email:
English
1. To fix the tool holder to the machine, use
the pin for positioning. Tighten the 4 fixing
screws of fixations (important, make sure
that the screws have the same clamping
force).
2.Adjust the offset position of your tool.
3. During the mounting or dismounting of
your tools, block the broach on
hexagonal, using an adapted wrench.
4.
Adjust the angle with the three
screws.
MARK :
never use the chuck with empty
positions. Use the supplied corks.