background image

FCC Warning 

 

This device has been tested and found to comply with limits for a 

Class A digital device, pursuant to Part 2 and 15 of FCC Rules, 
These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a 
commercial environment.  This equipment generates and radiates 
radio frequency energy and, if not installed and used in accordance 
with the user’s manual, it may cause interference in which case 
users will be required to correct interference at their own expenses. 

 

CE Warning 

 

This is a Class A product.    In a domestic environment, this product 

may cause radio interference in which case the user may be required 
to take adequate measures. 

 
Introduction 
 

This switch provides 16 10/100M ports. It was designed for easy 

installation and high performance in an environment where traffic is 
on the network and the number of users increases continuously. 

 
The compact rigid desktop size was specifically designed for small to 

medium workgroups. It can be installed where space is limited; 
moreover, it provides smooth network migration and easy upgrade to 
network capacity. 

 
 

 

Содержание SW-0024f2
















































Отзывы: