“Envelope Filter” Setup
After making sure that the Unit is set to Envelope Filter mode, turn the “RANGE” knob to the one
o’clock position. Adjust the output sound to the point you like the most by turning the “RANGE”
knob. If the sound has too much bass, turn the knob clockwise. If it has too much treble, turn the
knob counterclockwise.
“Arrpegiator” Setup
After making sure that the Unit is set to Arrpegiator mode, turn the “FREQ” knob to the eleven o’clock
position. Adjust the output sound to the point you like the most by turning the “FREQ” knob. If the
sound has too much bass, turn the knob clockwise. If it has too much treble, turn the knob
counterclockwise.
“Expression Pedal” Setup
Connect the Expression Pedal to “EXP. PEDAL” by using Audio Cable (Guitar Cable). (* Use Mono
Plug.) Once the plug is inserted, the Envelope Filter function will be automatically turned OFF, and
then you can control the Unit by the Expression Pedal using it as a Filtering Effect. In case you use the
Volume Pedal instead of the Expression Pedal, connect a cable from the unit’s “EXP. PEDAL” to
“Output” of the Volume Pedal. If the pedal has a minimum volume set up, set its Low Range while the
pedal is set at the lowest position.
*Note: the value change of sound may vary depending on pedals due to specification
differences of each manufacture.
Precautions
To prolong the battery life, unplug both Input and Output after each use.
This Unit is designed to create high volume output by its amplification circuit. Before turning on the
Amplifier, always make sure to set “Volume” knob to low position. Excessive amount of output
may damage other equipment connected to the unit.
Do not disassemble or modify the Unit except for battery change. This will void the warranty. If
you find any defects or need repair, please contact us.
Trimmers (TRIMMER#1 & #2) are for factory adjustments only. Do not attempt to adjust them.
Specifications
Dimensions
• • • • • • • • • • • • • • • • • (W/D/H): 6” X 3.27” X 1.98” (50MM X 151MM X 83MM)
Weight
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 1 lbs. (500g)
Power Consumption
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • VDC x 2 / 12mA
Battery Type
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 9VDC (006P) x 2
Input Impedance
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 100k (min)
Output Impedance
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 100k
*Specifications are subject to change without notice
P r o s o u n d C o m m u n i c a t i o n s I n c .
Phone/Fax: (818) 367-9593
E-mai:
©
2002 Prosound Communications Inc. All rights reserved.