PCI GN-1200TW2, Руководство пользователя

Страница: 26 / 56

19
3
Chapter 3 Troubleshooting
Troubleshooting
If you experience any problems with GN-1200TW2, please make sure the
appropriate driver is loaded, the proper cable is connected to the adapter
port and the hub/switch complies with the adapter specification, such as
10Mbps 10BaseT, 100Mbps 100BaseTX and 1000Mbps 1000BaseT, and
then check the LED.
GN-1200TW2 provides LEDs to indicate network status.
Ŝ
Speed
The LED indicates the adapter is connected to 10BaseT, 100BaseTX,
or 1000BaseT network. When the light is OFF , it indicates that the
adapter is connected to 10BaseT network. When the light is ON in
green color , it indicates that the adapter is connected to 100BaseTX
network. When the light is ON in amber color , it indicates that the
adapter is connected to 1000BaseT network.
Ŝ
Link/Activity
The LED indicates if the UTP has been LINK ok or not. When the
light is OFF, it indicates that the UTP port has not been connected or
LINK is not ok. When the light is ON, it indicates that the UTP port
has LINK. When the light is BLINKING, it indicates that there is
traffic flow on the network which the adapter is connected to.