© PCE Instruments
6
9
Switching the Tester On and Off
•
Press the
Meas
key to switch on the tester, the display shows measured values.
•
Press and hold the
Meas
key for 5 seconds, the tester will switch off.
•
To enable the Auto-Power Off function, please refer to chapter SETUP MENU.
10 Prior to Use
Switch on the tester 10 to 15 minutes and wait for the probe to polarize.
11 Setup Menu
PCE-WO2 10 pocket dissolved oxygen tester contains an integrated setup menu that is used to
customize the displayed option to meet measurement
requirements.
MENU
DESCRIPTION
OPTIONS
DEFAULT
Set the salinity coefficient of
sample.
Range: 0~35ppt
0.0ppt
Set the barometric pressure
coefficient.
Range:
450~850mmHg
760mmHg
Set the number of calibration
points.
1 point
1 point
2 points
Set the default measurement
unit.
mg/L
Concentration Unit
mg/L, °C
ppm
%
% saturation
Degrees Celsius
Degrees
Fahrenheit
Calibrate the temperature.
---
---
When the option is enabled,
the tester will automatically
sense a stable reading and
lock the measurements.
Enable
Disable
Disable
When the option is enabled,
the tester will automatically
switch off if no key is pressed
within 8 minutes.
Enable
Disable
Disable
Reset the tester to factory
default settings.
Enable
Disable
Disable
Power
On
5 sec.
Power
Off
