PCE Instruments PCE-VT 3800 Скачать руководство пользователя

Страница: 53 / 66

5.8.4

Brightness

In this tab, the display brightness can be adjusted from 10 % to 100 %. Automatic dimming can

also be set. After a set time, the display w ill be dimmed to a low er brightness in order to save

energy. Pressing any key w ill set the brightness back to its original value.

5.8.5

Language

This menu is used to sw itch betw een different menu languages. The available languages are

English, German, French, Spanish, Italian, Dutch, Portuguese, Turkish, Polish, Russian, Chinese

and Japanese.

5.8.6

Auto power off

This option enables the auto pow er off function. The available time periods are 1 minute, 5

minutes and 15 minutes. After the set time period has elapsed, the device will automatically turn

off and pressing any key w ill reset the timer. It is also possible to disable the auto pow er off

function.

5.8.7

Reset

This menu is used to reset the device to its factory settings. Device settings are separate from

the calibration and each can be reset individually by selecting the corresponding menu item.

A reset of the device settings w ill load default values for the measurement parameters and any

remaining menu options. A calibration w hich may have been performed beforehand is retained.

In order to prevent an inadvertent reset of the calibration, a code is required to enter this menu.

The code is the same as for the calibration itself:

1402

Fig. 13 Code request

ATTENTION:

When the calibration is reset, the previously performed and saved calibration w ill be deleted and

a default calibration for the supplied sensor w ill be selected. It is recommended to perform a

calibration after the reset.

The reset must be confirmed via the subsequent confirmation dialogue. The device w ill

automatically restart after the reset.

Fig. 14 Confirmation dialogue

lis

Содержание PCE-VT 3800



































































Результаты поиска

Содержание PCE-VT 3800

Отзывы:

Похожие инструкции для PCE-VT 3800

Бренды по названию

Популярные бренды

PCE Instruments PCE-VT 3800, Руководство пользователя

Результаты поиска

Содержание PCE-VT 3800

Отзывы:

Похожие инструкции для PCE-VT 3800

Бренды по названию

Популярные бренды