PCE Instruments PCE-VE 500, Руководство пользователя

Страница: 9 / 23

Manual
9
5.2 To adjust the channel
The handle bar and the LCD unit must be on the same channel during wireless transmission. Adjust the
channel by using a small slotted screwdriver, following the direction of the arrows as shown below.
Please refer to the following chart to select a suitable channel.
Channel Arrow indication Frequency
1 9,1 2414 MHz
2 A,2 2432 MHz
3 C,4 2450 MHz
4 8,0 2468 MHz
5.3 To get started
1. Screw the insertion tube into the connector according to the direction of the arrow and tighten the
screw nut. (Figure 1)
2. To activate the handle bar with the insertion tube, turn the LED adjustment wheel clockwise until you
hear a “click” followed by illumination of the green light. (Figure 2)
3. Push and hold the button of the LCD unit for 3 seconds until the image is displayed on the monitor.
(Figure 3)
4. Target the camera at the desired object. Push to capture a .jpg image or to record an .avi
video. (Figure 4)