© PCE Instruments
7
3.4
Control panel
Menu and on/off Selection and confirmation
Navigation keys
up, down, left, right
3.4.1
Switching the instrument on and off
Press and hold the menu key for more than 3 seconds to switch the thermal imaging camera on
or off. After switching on, the display shows the last selected image mode.
3.4.2
Switching the LED on and off
Press and hold the trigger key for at least 5 seconds to turn the LED on or off.
3.4.3
Picture-in-picture function
This function enables the IR image to overlap the image from the integrated digital camera. In this
way, measured objects can be clearly assigned. The overlapping can be adjusted in 25 % steps
by pressing the left or right navigation key in normal measuring mode.
3.4.4
Saving images
To do this, press the key on the handle of the thermal imaging camera in normal measuring mode.
A dialogue window appears, which can be confirmed with the menu key or cancelled with the
select/enter key.
Note
If the thermal imaging camera is connected to a PC via USB, it is not possible to save screen
captures.
3.4.5
Show/hide the minimum and maximum temperature
To do this, press the upper navigation key in normal measuring mode. In addition to the minimum
or maximum measured temperature, the current time is also shown or hidden in the lower right
corner of the display.
