© PCE Instruments
5
7
Equipment Operation
7.1
Switch on and off
Push the On/Measuring button to switch on the equipment. The PCE-LDM 45 will show its start
display as shown in the figure below. The unit of measurement last set is taken over.
The laser will be switched off automatically after 30 seconds and the equipment will be powered
off after 3 minutes of inactivity
(“Auto Off” function). Push and hold the Clear/Off button to switch
off the equipment.
7.2
Change Measurement Reference
Default setting of measurement reference is rear edge. Push the Measurement Reference button
to change the measurement reference to front edge.
7.3
Clear Button
Push the Clear/Off button to clear the last command or displayed data.
7.4
Unit Conversion
Push and hold the Functions button to switch the unit of measurement. Available units: m, ft and
in.
