© PCE Instruments
4
3.1
First use
If the device does not power on or shows the low battery icon, charge it by using the USB cable
that comes with the microscope. During charging, the LED next to the On/off key will glow in red.
3.2
Inserting the micro SD card
Turn off the microscope. Insert the micro SD card into the card slot which has a spring mechanism
so that the card snaps into place when pushed in.
3.3
Microscope assembly
The microscope comes in 4 separate parts. Guide the arm (1) and the microscope (2) through
the microscope bracket (3). Use the locking screws at the microscope bracket to tighten the
components. Insert the arm into the base (4) and tighten it by using the locking screw at the base.
3.4
Turning on/off the microscope
To turn on the device, press the
On/off key
for approx. 2 s.
To turn off the device, press the
On/off key
for approx. 2 s.
4
Functions
After turning on the microscope, it will automatically be in video mode. The mode can be changed
by pressing and holding the Menu key.
4.1
Video recording
•
When you are in video mode, a video icon will be displayed on the upper left edge of
the LCD.
•
Set the desired magnification and focus by turning the
focusing wheel
.
•
Set the desired brightness by using the
brightness slider
.
•
Press the
OK key
to start video recording. The recording time will be displayed on the
upper right edge of the LCD.
•
To stop recording, press the
OK key
again. The recording will be saved automatically.
1
2
3
4