© PCE Instruments
10
Measured value + bargraph display
Lower part
•
Bar graph display with upper and lower limit marker
7.6
Rotate display
If enabled in the menu, the display is rotated automatically in 90° steps:
0°, 90°, 180°, 270°
When making a vertical measurement, with the probe pointing up or down, the display set under
display indication is shown. When making a horizontal measurement, with the probe pointing to
the right or left, the display "Measured value + statistics" is shown.
7.7
Memory
7.7.1
Short-term memory
The short-term memory contains the values measured after the last switch-on.
When the meter is switched off, the measured values not saved to the long-term memory are lost.
To view, save or delete the measured values, press the
"⑤
OK" key in measurement mode
Use the
"①
Up" or
"②
Down" keys to navigate to the desired option and confirm with the
"⑤
OK" key.
When you select the option "Look Data", the measured values are listed.
With the "Save Data" option, you can copy the 100 most recently measured values from the short-
term memory to the long-term memory.
The "Clear Data" option deletes the measured values from the short-term memory.
Press the
"③
On / Off, Menu" key to return to measuring mode.
