Manual
16
7 Optional Accessories
7.1 Powder test box PCE-CSM PTB
With the optional powder test box PCE-CSM PTB you can determine the colorimetric parameters of
powders.
7.1.1 Construction
The PCE-CSM PTB consists of a base plate (1), a measuring plate with a powder compartment (2), a
lens (3) and a mounting ring (4).
7.1.2 Operation
1. Calibration:
Put the lens on the white calibrations plate and perform a white calibration. After
that, perform a black calibration.
2. Fill in the powder:
Fill the powder into the powder compartment of the measuring plate.
After that, put the powder test box back together (see 7.1.1). Make sure the screw joint is straight.
3. Measure:
Place the measuring hole of the colorimeter on the hole of the powder test box and
perform a measurement. Make sure the colorimeter is stable.
Clean the test box:
After using the powder test box, disassemble and clean it. If needed, you can use
alcohol for cleaning. After the cleaning, let the box dry and store it properly until the next use.
Powder compartment
