PCE Instruments PCE-AQD 50, Руководство пользователя

Страница: 40 / 50

© PCE Instruments
37
Eng
li
s
h
After selecting Time format or Date format , the device will display highlight the value to be
modified in white. The user can change the value with the arrow keys
▲ and ▼. The possible
values for the time format are 24h and 12h and the options for the date format are dd.mm.yyyy,
dd/mm/yyyy, mm.dd.yyyy, mm/dd/yyyy, yyyy.mm.dd and yyyy/mm/dd . Once the format is
selected, the OK key must be pressed.
Note:
If 12h is selected for the Time format , the time will be displayed with am/pm.
Fig. 55 Time format change
Fig. 56 Date format change
5.4.3.3 Alerts submenu
Via this submenu, you can enable/disable and define an alarm for each measured variable. In
case the measured value for a certain variable exceeds the limit set in the alert, the device will
beep every 2 seconds for a duration of 10 seconds and a red LED will turn on.
When you enter the menu, the device will display a list of the sensors represented by their units
as well as the icon
✓
next to each sensor with an enabled alarm (fig. 22).
For enabling/disabling or setting an alarm, use the arrow keys
▲ and ▼ to select the sensor you
wish to set. Then press OK to open the specific alarm menu for the selected sensor (fig. 23).