PCE Instruments PCE-423, Руководство пользователя

Страница: 12 / 14

Manual
12
6.2 Adjust the value of the cross-sectional area (AREA)
To access the adjustment screen of the cross-sectional area, use and until the display
indicates
“AREA”, the unit and the actual value of the cross-sectional area (Fig. 3). Then press
to
confirm. The digits on the screen start to flash. Now you can set the decimal point by using and
to navigate through the digits. To confirm the decimal point position, press . After that, the
last digit starts to flash. You can now set its value (from 0 to 9) by using and . Again, press
to confirm. The next digit starts to flash and you can set its value as described above. Repeat this
procedure until you have set the desired values for all digits. After confirming all settings, you can exit the
setup menu by holding for 3 seconds.
6.3 Activate/deactivate the Auto Power Off function (SLP)
To access the setting screen of the Auto Power Off function, use and , until the display shows
“SLP”. Then, press to confirm. Now you can choose between “ON” and “OFF” by using
and
. To confirm your selection, press . After that you can leave the setup menu by holding
for 3 seconds.