14
5. The device can be switched on after the
computer has restarted.
6. Connect the device to a USB serial port.
The driver will then be installed automatically
and can then be found in the Device
Manager of your computer.
7. If the driver is installed completely, the
computer will show “CP2101 USB to UART
Bridge Controller (COMX).“ in the device
manager submenu COM and LPT. Note the
COM-connection (COM 3 in the picture
above) This has to be set within the
software.
8.
Push
“Setup” button to initiate
communication
. After the software is
installed, start the application “Sound Level
Meter“.
