Manual
8
Now you get to the
sample wait time
settings:
Here you can adjust the time, which the spindle remains immersed in the fluid without any movement
before starting the rotation. The fluid can stabilize during this period of time.
By default, the sample wait time is set to 1 second. By using the Up and Down buttons, you can set it up
to 99 seconds. Once you have set your desired value, press Enter to confirm.
Next you get to the
sample measure time
settings:
Here you can set the rotation time of the spindle within the fluid after the measurement has started. After
this period of time, the reading appears on the display.
By default, the rotation time is set to 10 seconds, but you can set it to anything between 5 and 99
seconds by using the Up and Down buttons. Once you have reached the desired value, press Enter to
confirm.
Now you get to the
time and date
settings:
First, you have to select how the date shall be displayed. You can choose between EU mode (day-month-
year) and US mode (month-day-year). Use the Up and Down buttons to select and press enter to confirm.
Based on your selection, you can now set the date and time in EU or US mode:
First, select the day of the week by using the Up and Down buttons. Press Enter to confirm.
Next, set up the date. In EU mode you first have to select the day, followed by the month and the year. In
US mode it is the month first, followed by the day and the year. Use the Up and Down buttons to select a
value. By pressing Enter, you get to the next selection. After confirming all three values (day, month,
year) by pressing Enter, you get to the time setting.
You set the time just as you have set the date before. First choose the hours by using the Up and Down
buttons and press Enter to confirm. Then do the same with the minutes and with the seconds afterwards.
After confirming the seconds by pressing Enter, the setup is finished and you will be redirected to the
information screen automatically.
