© PCE Instruments
6
10 Timer function
A timer can be started with the timer function. To do this, press and hold the timer key for at least
3 seconds. To set a time, press the up and down keys. The time can only be set in minutes.
Pressing the timer key starts the countdown. When the countdown is over, an audible alarm is
triggered. Press and release the on/off key once to enter measurement mode and make
measurements with the timer activated. The timer icon shows when the timer or stopwatch is
active.
10.1
Stopwatch
To start the stopwatch, first press and hold the timer key to enter timer mode. Then press the
timer key again to start the stopwatch. Press the timer key again to stop the timer. Press and hold
the timer key for two seconds to reset the stopwatch.
Press and release the on/off key once to enter measurement mode and make measurements
with the stopwatch activated. The timer icon shows when the timer or stopwatch is active.
11 Recharging the meter
To charge the meter, it can either be connected directly to a micro USB cable or placed in the
charging station. The battery status indicator shows whether the battery is being charged.
