6
6. SD Card Routes
When you get the product, recommend you set up the time and date for the future management of the files.
The product press time is YEAR 2007, January 1
st
. If file name shows first two codes are 11, it indicates the
time is preset time.
The file name is defined not by sequence ID, but by photoing time.
Picture file and video file are defined by the same way, but extension is different. Picture file is .ASF.
7. Troubleshooting
No image on the LCD monitor after turn power on:
If battery is exhausted, turn power on and then on action, please charge battery or use AC adapter.
No image but words on the LCD monitor after turn power on :
Please check connector if connected well.
Cannot take picture and video
No SD card inserted, no photo taking and videoing.
If SD card is out of order, data cannot be saved to the card.
Shut down;
When all the function freeze or fail, please insert an insulated needle to the hole on the back of the main unit.
The system will restart automatically.
Back
RESET
8. Caution
Do not remove the SD Memory Card while data is being saved to the card while photographing or videoing, as
this may cause the data to be lost or the card to be damaged. While videoing it need storage mass data, we
recommend using more than 80X SD card to catch batter quality.
Important:
Use cotton buds soaked in alcohol to clean the lens.
Don’t use the product in dangerous environment such as oil tank.
Don’t use chemical liquid to clean off the surface of the product.
Don’t open the product unit, the action might damage the product.
When storing the product, be careful when bending the probe. Don’t bend the probe 180 degree.
Please use original spare parts, if not, it might damage the product.
Don’t use the product in an aircraft and medical field.
Don’t use the product under the direct sunshine.
Please keep the product in dry and adequately ventilated environment.
9. Specification
Specification
Handle Working Temperature -20 – 60
℃
Probe Working Temperature -20 - 70
℃
Total Storage Temperature -20 - 60
℃
While Battery in charge 0 - 40
℃
10. Specification
Insertion Tube & light Source SPEC.
Image Sensor
MOS Image Sensor
Resolution (Dynamic / Static) 320(H)*240(V)640(H)*480(V) ~30M
Size
Tip (Insertion Tube ) Diameter 5.5mm
Frame rate
~30 fps
S/N Ratio
42dB
Exposure
Automatic
White balance Fix
Field of View (FOV) 67º
Depth of Field (DOF) 1.5cm~10cm
Light Source 4 White LED
