5
7. Max Min Operations (see figure 3)
MIN:
Recorded maximum value.
MIN:
Recorded minimum value.
SetMax:
Click to enable the SetMax function or unclick to disable.
Enter the upper limit value in full digit; it does not identify range or function.
SetMin:
Click to enable the SetMin function or unclick to disable.
Enter the lower limit value in full digit; it does not identify range or function.
The Meter is connected properly to the computer and data is recording.
OL!!
Overload, the recorded value exceeds the SetMax and SetMin value.
It will be flashing and the computer will sound if loudspeaker is installed.
8. Selecting Number of Records
You could select the number of records to be recorded from the “Record” pull down menu. The number of
record that the software could record is highly depending on the computer specification. If the number of
records exceeds certain number, the computer will slow down. Below is the guide helping you to do the
selection:
•
Normally a 486 computer can record from around 1000 to 5000 records.
•
Normally a 586 computer can record from around 10000 to 50000 records.
•
Pentium 2 or above computer can record around 50000 or more records.
9. Remarks
1. Before you re-install the software, please remove the installed program as follows:
My Computer > Control Panel > Add/Remove Programs
2. If abnormal digits or symbols were found, please remove font ”UNI1-A2” and then install new
font set from ”FON1” directory on the provided CD-ROM.
In this direction will find a vision of the measurement technique:
http://www.industrial-needs.com/measuring-instruments.htm
NOTE:
"This instrument doesn’t have ATEX protection, so it should not be used in potentially explosive
atmospheres (powder, flammable gases)."
