Manual
9
7.3 Delete data (Empty the memory)
1) Turn off the meter first.
2) Press the "REC Button" continuously and not release, at the same time press the "Power Button"
momentarily, the display will show following screen, then release both fingers from the buttons.
3) Press "
▼ Button" momentarily, display shows:
4) Press "Button" momentarily, the display shows:
Now all the saved data is deleted, memory will empty.
8 Replacement of Battery
1) When the LCD display show "
“, It is necessary to replace the battery. However, in-spec
measurement may still be made for several hours after Low Battery Indicator appears before the
instrument become inaccurate.
2) To replace the battery, rotate and remove the "Battery Cover" take out the old batteries, install
new batteries:
DC 1.5V battery ( UM-4/AAA ) x 4 PCs.
3) When install the batteries, should make attention the battery polarity.
4) After install the batteries, reinstall the battery cover again.
