© PCE Instruments
4
4.1
Display
1.
Relativ value (REL)
2.
Reading held (HOLD)
3.
Negative value
4.
DC voltage / DC current
5.
AC voltage / current
6.
Auto range
7.
Not available
8.
Diode test
9.
Continuity test
10. Not available
11. Auto Power Off function
12. High voltage
13. Battery icon
14. Units
4.2
Rotary function switch
Select the desired measuring function or the measurement range for the current measurement
with the rotary function switch.
Switch position
Function
V~
AC voltage measurement - press SELECT to choose frequency or duty
cycle.
V
⎓
DC voltage measurement
Ω
Resistance measurement
Diode / continuity test
Capacitance measurement
Hz
Frequency measurement - press SELECT to enter duty cycle
measurement mode.
°C/°F
Temperature measurement
– press SELECT to switch between degrees
Centigrade and degrees Fahrenheit.
NCV
Non-contact voltage detection
µA
DC current measurement
(0 µA … 6000 µA) - press SELECT to enter AC
current measurement mode
(0 µA … 6000 µA).
mA
DC current measurement
(0 mA … 60 0mA) - press SELECT to enter AC
current measurement mode
(0 mA … 600 mA).
A
DC current measurement
(0 A … 10 A) - press SELECT to enter AC
current measurement mode
(0 A … 10 A).
4.3
Interfaces
Interface
Function
10 A
Input for current measurement 0
…. 10 A. (at 10 A max. 10 s.).
VΩ mA
Input for voltage, resistance, diode, continuity and temperature.
Current measurement 0 µA
… 600 mA. (Max. 18 h below 600 mA)
COM
Negative interface for all measurements
