__________________________________________________________________________________
4
5. DISPLAY
The reading is shown in the form of bars:
a continuous line
= even values e.g. 6, 8, 14
dotted line
= uneven values e.g. 7,11
Overflow: reading 44%/2.0%
Please note: Characteristics due to growth or type of wood and deviating wood temperatures may make it
necessary to correct the displayed values. Measurements should be carried out according to the drying and
weighing/calcium carbide method in the case of inspections or for reference purposes.
Automatic Power OFF
In order to conserve battery life, the meter will automatically turn off after approximately 15 minutes. To
press and restoration the power switches the meter display is on.
Battery check
“
O
…… B……
O”
Connect electrodes with
B
contacts to the protective cap.
Reference display for wood: 44%
Reference display for building material: 2.05%
Display has to full.
6. CHANGING THE BATTERY
When the batteries become exhausted or drop below the operating voltage, the battery warning “ “
symbol will appear in the LCD display. The battery should be replaced.
Unscrew the 1 screws at the back of the instrument.
Remove the battery housing. Change battery.
Observe polarization!
Reconnect instrument.
In this direction will find a vision of the measurement technique:
http://www.industrial-needs.com/measuring-instruments.htm
NOTE:
"This instrument doesn’t have ATEX protection, so it should not be used in potentially explosive
atmospheres (powder, flammable gases)."
