PCE Health and Fitness PCE-330, Инструкция по эксплуатации, Страница: 10 / 15

Hygro-Thermometer
9
9. COMMUNICATION WITH A PC
Users can transfer data from the built-in memory on the instrument to a PC through SE318 software.
The communication requires a USB or RS-232 serial connection.
TESTLINK PCE-330 SOFTWARE
(1) The SE-318 package contains:

80mm CD

Custom designed USB cable for SE318
(2) System Required:
Windows NT 4.0/ NT2000/ XP/ VISTA/ Windows 7
(3) Minimum Hardware Required:

PC or NoteBook with Pentium 800MHz or higher, 128 MB RAM

At least 50 MB hard disk space available to install SE318

Recommended screen resolution 1024X768 or above
(4) Install PCE-330 and USB-120 connector driver:
1. We recommend close all other application before installing SE318.
2. Insert setup CD disk to CD disk drive to display install screen. You may also run
MainSetup.exe in the directory of the CD.
3. Click Install to begin installation.
4. It will install USB-120 connector driver first:
5. While installing, it will show this window below, just click
“
next
” to continue.(see Fig.1)
6. Select
“
Launch the CP210x VCP Driver Installer
” option, and then click Finish. (see Fig.2)
(Fig.1) (Fig.2)
7. Click Install.