PCD U.S. Cellular UM185US, Руководство пользователя

Страница: 56 / 65

55
APPENdiX
■
SPECiFiC ABSORPTiON RATES (SAR)
Maximum: sAr .9 w/kg cdMA835 body
sAr 0.85 w/kg Pcs900 body
this Model device Meets the governMent’s
reQuireMents For eXPosure to rAdio wAves.
Your wireless device is a radio transmitter and receiver. it
is designed and manufactured not to exceed the emission
limits for exposure to radiofrequency (rF) energy set
by the Federal communications commission of the u.s.
government. these limits are part of comprehensive
guidelines and establish permitted levels of rF energy
for the general population. the guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation
of scientific studies. the standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health. the exposure standard for
wireless device employs a unit of measurement known as
the specific Absorption rate, or sAr. the sAr limit set by
the Fcc is . w/kg. *
tests for sAr are conducted with the device transmitting
at its highest certified power level in all tested frequency
bands. Although the sAr is determined at the highest
certified power level, the actual sAr level of the device
while operating can be well below the maximum value.
this is because the device is designed to operate at multiple
power levels so as to use only the power required to reach
the network. in general, the closer you are to a wireless
base station antenna, the lower the power output. before
a device model is available for sale to the public, it must be
tested and certified to the Fcc that it does not exceed the
SPECiFiC ABSORPTiON
RATES