PCchips M935 Series Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 44

background image

Mainboard User’s Manual

This publication, including all photographs, illustrations and
software, is protected under international copyright laws, with all
rights reserved. Neither this manual, nor any of the material
contained herein, may be reproduced without the express written
consent of the manufacturer.
The information in this document is subject to change without
notice. The manufacturer makes no representations or warranties
with respect to the contents hereof and specifically disclaims any
implied warranties of merchantability or fitness for any particular
purpose. Further, the manufacturer reserves the right to revise this
publication and to make changes from time to time in the content
hereof without obligation of the manufacturer to notify any person
of such revision or changes.

Trademarks

IBM, VGA, and PS/2 are registered trademarks of International
Business Machines.
Intel, Pentium/II/III, Pentium 4, Celeron and MMX are registered
trademarks of Intel Corporation.
Microsoft, MS-DOS and Windows NT/95/98/ME/2000/XP are
registered trademarks of Microsoft Corporation.
PC-cillin is a registered trademark of Trend Micro Inc.
AMI is a registered trademark of American Megatrends Inc.
A3D is a registered trademark of Aureal Inc.
MediaRing Talk is a registered trademark of MediaRing Inc.
3Deep is a registered trademark of E-Color Inc.
SiS is a trademark of Silicon Integrated System Corporation.
Other names used in this publication may be trademarks and are
acknowledged.

Copyright © 2001

All Rights Reserved

M935 Series, V5.0A

S650/March 2002

1
2
3
...
»

Содержание M935 Series













































Отзывы:

Нет отзывов

Похожие инструкции для M935 Series

CYTVII-B-E-1M-SK

Бренд: Cypress Страницы: 19

Бренд: Freescale Semiconductor Страницы: 4

Бренд: Gigabyte Страницы: 80

Бренд: ASROCK Страницы: 26

P35D3 Platinum - Motherboard - ATX

Бренд: MSI Страницы: 104

Бренд: ITX SECURITY Страницы: 18

Бренд: Albatron Страницы: 46

Бренд: ECS Страницы: 60

NCP45491PMNGEVB

Бренд: ON Semiconductor Страницы: 9

nForce 680i LT SLI

Бренд: XFX Страницы: 137

Бренд: NXP Semiconductors Страницы: 4

Бренд: J&W Страницы: 36

Бренд: HOLT Страницы: 14

Бренд: DFI Страницы: 71

Бренд: DFI Страницы: 167

SY-P4-645DX DRAGON Ultra

Бренд: SOYO Страницы: 173

Бренд: SOYO Страницы: 119

Бренд: Abit Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды