Primary Graphics Adapter (PCI)
If you are going to use an AGP graphics card, set this item to AGP.
Your system will attempt to initialize the AGP card first. But if you
have PCI graphics card then leave this item to its default setting.
Allocate IRQ to PCI VGA (Yes)
This option will be used to allocate IRQ for PCI VGA card. In
general, some of PCI VGA cards need IRQ support.
PCI IDE BusMaster (Enabled)
Set this option to Enabled to specify that the IDE controller on the
PCI bus has bus mastering capability.
OffBoard PCI IDE Card (Auto)
This option specifies if an offboard PCI IDE controller adapter
card is used in the computer. You must also specify the PCI
expansion slot on the mainboard where the offboard PCI IDE
controller card is installed. If an offboard PCI IDE controller is
used, the onboard IDE controller is automatically disabled.
OffBoard PCI IDE Primary IRQ (Disabled)
This option specifies the PCI interrupt used by the primary IDE
channel on the offboard PCI IDE controller.
OffBoard PCI IDE Secondary IRQ (Disabled)
This option specifies the PCI interrupt used by the secondary IDE
channel on the offboard PCI IDE controller.
DMA Channel 0/1/3/5/6/7 (PnP)
This option allows you to specify the bus type used by each DMA
channel.
IRQ (PCI/ PnP)
This option specifies the bus that the specified IRQ line is used on.
They allow you to reserve IRQs for legacy ISA adapter cards and
30