3: BIOS Setup Utility
PCI / Plug and Play Setup Page
This page sets some of the parameters for devices installed on the
PCI bus and devices that use the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S
Yes
Share Memory Size
16MB
O/S Control
Normal
Primary Graphics Adapter
PCI
Allocate IRQ for PCI VGA
Yes
ESC : Quit
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal values
F7 : Load Best performance values
Plug and Play
Aware O/S
Enable this item if you are using an O/S that
supports Plug and Play such as Windows 95 or
98.
Share Memory
Size
This item lets you allocate a portion of the main
memory for use by the onboard VGA display.
O/S Control
This item lets you select Japanese operating
system or not.
Primary Graphics
Adapter
This item indicates if the primary graphics adapter
uses the PCI or the AGP bus. The default PCI
setting still lets the onboard display work and
allows the use of a second display card installed in
a PCI slot.
Allocate IRQ for
PCI VGA
If this item is enabled, an IRQ will be assigned to
the PCI VGA graphics system. You set this value
to No to free up an IRQ.
Load Optimal Settings
If you select this item and press
Enter
a dialog box appears. If you
press
Y
, and then
Enter
, the Setup Utility loads a set of fail-safe
default values. These default values are not very demanding and
they should allow your system to function with most kinds of
hardware and memory chips.
25
