PCchips M758 Plus Series, Руководство пользователя

Страница: 37 / 46

3: BIOS Setup Utility
Features Setup Page
This page sets up some parameters for peripheral devices
connected to the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC Enabled
OnBoard Serial PortA 3F8h/COM1
OnBoard IR Port Disabled
OnBoard Parallel Port 378h
Parallel Port Mode EPP+ECP
Parallel Port IRQ 7
Parallel Port DMA 3
OnBoard PCI IDE Both
Ultra DMA Support Disabled
OnBoard Sound Enabled
OnBoard LAN Enabled
USB Function Enabled
USB Function For DOS Disabled
ESC : Quit

: Select
Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
OnBoard FDC Use this item to enable or disable the onboard
floppy disk drive interface.
OnBoard Serial
PortA Use this item to enable or disable the onboard
COM1 serial port, and to assign a port address
OnBoard IR Port Use this item to define the protocol for an
infrared port if you have installed an optional IR
port. The choices are IrDA and ASKIR.
Onboard Parallel
Port Use this item to enable or disable the onboard
LPT1 parallel port, and to assign a port
address. The Auto setting will detect and
available address.
Parallel Port Mode Use this item to set the parallel port mode. You
can select SPP (Standard Parallel Port), ECP
(Extended Capabilities Port), EPP (Enhanced
Parallel Port), or ECP + EPP.
Parallel Port IRQ
Use this item to assign either IRQ 5 or 7 to the
parallel port.
Parallel Port DMA
Use this item to assign a DMA channel to the
33