Hardware Configuration
11
Connectors
Attach system components and case devices to the
mainboard via the mainboard connectors. A description
of each connector pins follows. See Figure 2Ð1 for the
location of the connectors on the mainboard.
Note: Make sure that the power is turned off before making
any connection to the board.
PW1 – AT Power Connector
COM1/2 – Serial Port #1/#2
PRN1 – Parallel Printer Connector
FDC1 – Floppy Disk Drive Connector
IDE1/IDE2 – Primary/Secondary IDE
Connectors
KBD1 – Keyboard Connector
PS2/PS1 – PS/2 Mouse Pin
Header/Connector
VGA1 – VGA Connector
J3 – ATX Form Card Connector
This connector contains 2 sets of USB interface, PS/2
Mouse, and Infrared connectors. Connect the ATX
Form Card cable to this connector.
Содержание M717
Страница 4: ......
